Well Water Pressure Tank | Everything you need to know (2022)

A pressure tank in your well water system is a critical component. It is important to understand its purpose and how it works so you can troubleshoot it yourself when any problem comes.

There are three basic purposes of a well water pressure tank. It stores water, provides water when the pressure pump is not running and maintains a constant water supply during high demand or drought.

Well Water Pressure Tank – Everything you need to know

In this article, we will discuss all the major aspects of a well water pressure tank.

  • Well water pressure tank PSI
  • Well water pressure tank installation
  • How does a well water pressure tank work?
  • How to drain a well water pressure tank
  • What size well water pressure tank do I need?
  • How to tell if your well water pressure tank is bad?
  • How to fill a well water pressure tank?

Let’s begin our discussion!

Well Water Pressure Tank PSI

Maintaining proper pressure in your well water tank is critical to ensure its proper functioning. Each pressure tank has a pressure switch that controls the cut-on and cut-off pressure for the pressure tank. In other words, it tells the pump to turn on and off.

For example, if the pressure setting on your switch is 40/60. 40 is the cut-on pressure, and 60 is the cut-off pressure. When the pressure in the system drops to the low preset setting (cut-on), the pump turns on, and when the pressure in the system rises to the high preset setting (cut-off), the pump turns off.

The Right Pressure Settings: The common pressure settings on well water tanks are 20/40, 30/50, and 40/60. The right pressure setting depends on your home size, usage pattern, the number of stories in your home, and how far your faucets are from the pressure tank.

Can I change the pressure settings on a well water tank?

Yes. You can change the pressure settings on a well water tank. It is an easy but slightly complex process. All the required information is available in the user manual of your well pump as well.

The following video explains how you can adjust the pressure settings on a well water pressure tank.

Well Water Pressure Tank Installation

Many states in the U.S. mandate that certified professionals must perform all well water installation and maintenance tasks. However, some neighborhoods permit well owners to perform maintenance tasks such as replacing a well water pressure tank. Moreover, it is well owner’s responsibility to check and maintain water quality.

It is best to install the pump by a professional for the first time. However, you can always replace it if it is not working properly. The biggest symptoms of a bad well water pressure tank are clicking noises when the water is running or water coughing at all taps.

You can replace the water tank in under a couple of hours if you have basic plumbing skills and save yourself a handsome amount in lieu of the plumbing fee.

Buy a new tank of the same size and, if possible, get the same brand, so you’ll know that everything will hook up the same way. If you are installing a bigger tank or a tank from a different brand, you may need to improvise on a few fronts. You’ll need to make some space to install a bigger tank.

Let’s learn how you can replace a well water pressure tank.

  • Begin by turning off the circuit breaker to the well and the wall switch near the pressure tank.
  • Drain the water in the pressure tank by connecting a garden hose to the draining valve on the pressure tank.
  • You can also open the faucets nearby to speed up the draining process.
  • You need to install a plumbing Tee depending on the tank’s specification.
  • Install Teflon tape on both ends of the tap fittings; install the drain valve, the pressure relief valve, and the pressure gauge.
  • The tank assembly will look like the one shown in the image below.

Well Water Pressure Tank | Everything you need to know (1)

  • Install connectors on both ends of the Tee (one going to your home and one accepting water from the well).
  • The next step is to check the air pressure in the water tank. Refer to the user manual to see the cut-on pressure of the tank. The pressure inside the tank must be 2-3 PSI below the cut-on pressure. If the tank has a cut-on pressure of 30 PSI, the pressure inside the well must be 28 PSI.
  • You can use a regular tire gauge or a digital pressure gauge to check the pressure inside the water tank. Depending on the situation, you can release the air or add air using an air compressor. Put the cap back on when you have achieved the right pressure.
  • Install the water inlet and water outlet with the pump.
  • Turn on the circuit breaker and pressure pump switch.

That’s it. You have successfully replaced the well water pressure tank.

How does a Well Water Pressure Tank Work?

The primary purpose of installing a water tank with a well is to store water to supply water at constant pressure in your entire home. Water from the well enters the pressure tank and is then distributed to your home’s plumbing system.

Three types of pressure tanks are used for storing water in a well water system.

  • Air-over-water tanks
  • Diaphragm tanks
  • Bladder tanks

Let’s learn about each type’s functionality to understand how they work!

Air-Over-Water Tank: This type of tank works by maintaining a layer of air over water. The pressurized air over the water pushes down on the water to create the pressure needed to supply water to your home.

Air-over-water tanks were frequently used a few years ago, but their use is rapidly decreasing. These tanks appear larger than others but have a small capacity. The small capacity causes the pump to cycle on and off repeatedly and leads to premature failure.

Diaphragm Tanks: These tanks have two chambers inside a single tank. One chamber is dedicated to water, and the other is to air; a rubber diaphragm separates both chambers. The rubber diaphragm is permanently attached to the tank’s inside, rising or falling with the water level inside the chamber.

When the water enters the lower chamber, it pushes the diaphragm up. This triggers a switch that turns off the pump.

A couple of issues in this tank start showing up after a couple of years. The diaphragm gets loose or folds over itself. The only solution to both problems is replacing the water tank.

Bladder Tanks: The bladder pressure tanks use two separate chambers for water and air. These tanks have an air balloon that expands or contracts relative to the water volume in the tank.

These tanks are rated better than the two discussed above. They don’t have the issue of a diaphragm or single chamber tank because they are self-contained. Air and water don’t mix in the tanks, and you don’t need to add air to these tanks.

Bladder pressure tanks last longer than other pumps. However, they can develop problems as well. The most common issues with these types of pumps are failure of the internal bladder and the bladder not able to inflate.

How to Drain a Well Water Pressure Tank?

You may need to drain a well water pressure tank for several reasons, such as adjusting pressure, replacing the tank, or removing the sediment at the bottom of the tank.

Emptying the well water pressure tank is an easy but time-consuming process. Here’s how you can do it.

  • Turn off the circuit breaker and the pressure switch.
  • Connect a garden hose with the water drain valve on the pressure tank.
  • Open the valve and let the water flow. You can also open a few nearby faucets to speed up the process f you have a large tank.
  • Notice the water coming out from the tank by putting the hose in a clean container so you can check if it has sediment in it.
  • If the water has sediment, you’ll need to run the pump for 30 seconds and then drain the water until all the sediment has been removed from the tank.

What Size Well Water Pressure Tank do I Need?

Installing the right-size pressure tank with your water well is critical to maximizing the system’s efficiency and extending the pump’s motor life. A rightly sized pump reduces the risk of premature pump failure by extending the time between the cycles.

A large tank is a better option considering these facts, but some constraints like budget and installation space may stop you from buying a big tank. The rational approach here is to size the tank accurately so you don’t have to face issues later.

Before we explain how to size the well water pressure tank correctly, it is important to bust a common myth about pressure water tanks. Many people believe that the well water’s stated size is the tank’s actual drawdown (available water capacity). This isn’t true. The actual drawdown capacity is around 40% percent of the stated capacity.

Before calculating the pressure tank size, you need to know about the following 3 things.

Flow Rate: The flow rate is how many gallons your pump produces in one second.

Cut-in/Cut-out PSI: These are the pressure settings on your pump. They are usually given in 20/40, 30/50, and 40/60 settings.

Minimum Runtime (the time between cycles): This is the minimum time a pump runs between the cycles.

An easy way to determine your tank’s drawdown capacity is given below

Flow Rate x Runtime = Tank Drawdown Capacity

Please note that pumps with a flow rate or capacity up to 10 gallons a minute should have a tank with a minimum one-gallon drawdown capacity for each gallon per minute of the pump.

For example, a 10-gallon a minute pump and a tank with a 10-gallon drawdown capacity will work best.

Here is a sizing chart to help you find the right size for your pressure tank.

The following video will further educate you about calculating the right size of a well water pressure tank.

How to tell if your Well Water Pressure Tank is bad?

A bad well water pressure tank can create a few problems for your household. Hence, it needs to be replaced as soon as possible. The following signs indicate a well water pressure tank replacement.

Fluctuation in water pressure: There can be several reasons behind water pressure fluctuation in your home. However, it doesn’t necessarily mean that fluctuation is due to a bad pump, but it is a reaso0n enough to get your pump inspected to avoid any further damage.

Noisy pressure tank: The pressure tank sends signals to the water pump to turn off or on. You will listen to continuous clicking sounds if the pump has gone bad. Any problems in the air-water system inside the pump warrant an instant pressure tank replacement.

Spitting faucets: If all the faucets in your home are spitting or coughing, it could happen due to a faulty water tank.

High electric bills: A faulty water tank not only impacts your home’s flow rate but also skyrockets your monthly electricity bills. This hike is because the pump stays on for more time due to a faulty water tank.

Damaged well pump: A well water pump can last 10-15 years without any issues. If the pump starts creating a problem unexpectedly, it is most probably due to a faulty well tank.

How to Fill or Adjust Well Water Pressure Tank?

The well water tank has water at the bottom and air at the top. This setup helps maintain constant pressure in your home.

You will need a pressure gauge and an air compressor to fill the water pressure tank with air. Find out the air valve on your tank. It is usually located on top of the valve. The air pressure inside the tank must be 2-3 PSI less than the cut-on pressure.

Adjust the air pressure as per the reading you get on the gauge. You should use a high-quality digital gauge so you get accurate measurements.

You might also like

Latest Posts

Article information

Author: Rubie Ullrich

Last Updated: 08/14/2022

Views: 6374

Rating: 4.1 / 5 (52 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Rubie Ullrich

Birthday: 1998-02-02

Address: 743 Stoltenberg Center, Genovevaville, NJ 59925-3119

Phone: +2202978377583

Job: Administration Engineer

Hobby: Surfing, Sailing, Listening to music, Web surfing, Kitesurfing, Geocaching, Backpacking

Introduction: My name is Rubie Ullrich, I am a enthusiastic, perfect, tender, vivacious, talented, famous, delightful person who loves writing and wants to share my knowledge and understanding with you.