Mingying Wang and Guanghai Shi
Figure 1. The white nephrite Buddhist carving by modern master Xi Yang is displayed in the British Museum. It presents an openwork papercut-style profile of Guanyin on the left and a three-dimensional carved lotus on the right, jointly manifesting the Buddhist culture with oriental characteristics (Michaelson et al., 2016). Photo © The British Museum (2017.3034.1).
Craftsmanship is a key element in Chinese jade carving art. In recent decades, the rapid development of tools has led to numerous changes in carving technology. Scholars are increasingly focusing on the carving craft in addition to ancient designs. Five periods have previously been defined according to the evolution of tools and craftsmanship, and the representative innovations of each period are summarized in this article. Nearly 2,500 contemporary works are analyzed statistically, showing that piercing and Qiaose, a technique to take artistic advantage of jade’s naturally uneven color, are the most commonly used methods. Current mainstream techniques used in China’s jade carving industry include manual carving, computer numerical control engraving, and 3D replicate engraving. With a rich heritage and ongoing innovation in jade craftsmanship, as well as increased automation, the cultural value and creative designs are both expected to reach new heights.
Jade carving is one of the oldest and most important art forms in China, a craft steeped in history and tradition that reflects Chinese philosophy and culture (Thomas and Lee, 1986). Carving, called Zhuo and Zhuo mo in Chinese, represents the arduous process of shaping and decorating an intractable material with abrasives to create the desired object (Hansford, 1950; Sax et al., 2004). During its more than 5,000-year history (table 1), Chinese jade carving has experienced five peaks—the late Neolithic Age (circa 3500–2070 BCE), the late Shang Dynasty (1600–1046 BCE), the Zhanguo Period (475–221 BCE), the Han Dynasty (206 BCE–220 CE), and the Qing Dynasty (1644–1911)—and was influenced by politics, economics, culture, and war (Kong, 2007). After Emperor Qianlong abdicated in 1795, the development of jade carving craftsmanship was relatively stagnant (Thomas and Lee, 1986). With the fall of the Qing Dynasty in 1911, the royal demand for jade carving faded. During that period, the folk workshops mainly focused on the carving of common jade wares such as jewelry and vessels. After 1949, state-owned jade carving factories were established one after another, with an increasing number of employees and the gradual popularization of electrically powered tools. In 1978, China opened its economy to the outside. With the support of the government, influenced by jade merchants and carvers from Taiwan and Hong Kong, and driven by an expanded domestic consumer market, China’s modern jade carving industry has seen a period of vigorous development.
There is a saying in China that “workers must first sharpen their implements when they want to do their best.” Indeed, the emergence of each peak in jade carving across its history in China is inseparable from the innovation of tools (Xu, 2011). Currently, jade carving tools are undergoing great changes, influenced by advances in manufacturing. However, little is known in the West today about the modern craft compared with ancient Chinese jade carving (Michaelson et al., 2016). Since the founding of the People’s Republic of China in 1949, papers on jade carving have been published in the West, but the majority have focused on traditional carving methods and only a few on the modern methods that emerged leading up to the 1990s (Hansford, 1950; Tucker, 1982; Markbreiter, 1985; Thomas and Lee, 1986; Desautels, 1986). In 2017–2018, nephrite jade works by Xi Yang and four other contemporary masters were collected by the British Museum for permanent display (box A), indicating that modern Chinese jade wares have begun to attract interest in the West (figure 1).
BOX A: MODERN JADE CARVINGS SELECTED FOR THE BRITISH MUSEUM
In 2017–2018, eight nephrite works created by Chinese modern masters Hongwei Ma, Guang Yang, Xi Yang, Ting Yu, and Yiwei Zhai were selected by the British Museum for its permanent collection. These works are on permanent display to the public as jade carvings by living Chinese artists of the twenty-first century.
Figure A-1. Hongwei Ma’s nephrite works “Wine Cup (Jue)” (left) and “Bronze Ram Zun” (right). Photos © The British Museum (2017.3032.1 and 2018.3019.1).
Figure A-2. Guang Yang’s “Incense Pot” in nephrite. Photo © The British Museum (2017.3033.1).
Figure A-3. Xi Yang’s nephrite work “Autumn in Suzhou.” Photo © The British Museum (2017.3035.1).
Figure A-4. Ting Yu’s nephrite “Eggshell Teapot.” Photo © The British Museum (2017.3036.1).
Figure A-5. Yiwei Zhai’s nephrite works “Beside is a bosom friend, thou. Everywhere is paradise, enow” (left and middle) and “The Rhyme of Spring” (right). Photos © The British Museum (2017.3037.1 and 2018.3020.1).
The main research factors of jade wares are texture, shape, pattern, and craft (You, 2001). Previous studies on Chinese jade carving have focused on the exploration of shapes and patterns. In recent years, with the rapid development of jade carving tools and craft, research on craftsmanship has increasingly attracted the attention of scholars (Kong, 2007; Xu, 2011). The authors of the present article conducted field visits to carving and trading sites such as Beijing, Shanghai, Suzhou, Yangzhou, Urumqi, Sihui, and Zhenping, including requisite visits to carving workshops and technical schools, to gain a more complete understanding of the current state. This article analyzes the development of jade carving tools over five periods and the representative carving craft during these periods. Finally, the processing methods and procedures of Chinese jade carving in the modern context are introduced.
EVOLUTION OF JADE CARVING TOOLS
In the process of fashioning stone tools, human ancestors gradually mastered the method of distinguishing jade from other “non-jade” stones. The emergence of the rotary machine (circa 3500 BCE), in which jade was held against a grinding tool being rotated by the other hand or another person, indicated that jade carving had completely separated from general stone craft to become an independent category (Yang, 2004, 2006). The innovation of the rotary tool is the most important factor in the development of Chinese jade carving. As the key component of the jade carving craft, the tool displays different characteristics in different development stages. Yang (2006) divided Chinese rotary machines into five generations, and Xu (2011) divided the evolution of the jade carving craft into five periods. The present authors combined the results from these studies and offer the following five generations of jade carving rotary tools in Chinese history.
First Generation (circa 3500–circa 2070 BCE). The primitive rotary jade carving machine appeared in the Hongshan and Lingjiatan cultural sites of the Neolithic Age (Yang, 2006). These jade carving tools were made primarily from natural materials such as stone, wood, and bone. Yang (1989a,b) proposed two main features of the primitive rotary carving machine. The first is that it allowed the carver to assume a sitting position. The second is that it was manually rotated.
Second Generation (circa 2070 BCE–circa sixth century BCE). The bronze rotary machine emerged and thrived from the Xia and Shang Dynasties to the early to mid-Chunqiu Period (Xu, 2014) as life in this period gradually centered on bronze technology. It is speculated that operators were kneeling and manually drove the machine to faster speeds than achievable before, based on the kneeling posture depicted in unearthed human stone carvings from this period and in the tomb of Fuhao (Yang, 2006).
Third Generation (circa sixth century BCE–circa 581 CE). The iron rotary machine appeared from the late Chunqiu Period until the Nan-bei Dynasty. Carvers still knelt on the ground while operating the machine (Xu, 2014). As smelting technology improved, iron tools were increasingly used and the jade carving machine evolved accordingly. It was still manually driven but provided increased efficiency because iron tools were sharper and more wear-resistant (Xu, 2014).
Fourth Generation (circa 581–1960). The table-type iron rotary machine was used from the Sui and Tang Dynasties through the Ming and Qing Dynasties and into the 1950s (Yang, 2006; Xu, 2014). In the Sui and Tang Dynasties, interior furniture changed people’s habit of sitting on the ground, and they instead sat on stools or chairs (Yang, 2006). As a result, the rotary machine in this period was of the table-type or tall-legged table-type and driven by a foot treadle that further increased its working efficiency (figure 2).
Figure 2. A restoration of a fourth-generation table-type iron rotary machine. The artisan sits at the table and carves the jade using the rotary tool and abrasive sands, driven by the foot treadle. Photo by Mingying Wang, from Tianjin Museum.
Fifth Generation (1960–present). The modern rotary machine has been used in the contemporary jade carving process since the 1960s (Yang, 2006; Xu, 2014). It was initially introduced from Europe, but with the emergence of its manufacturing industry, China began to independently research, develop, and produce these machines (Read, 1981; Markbreiter, 1985). The body of the jade rotary machine has changed from wood to iron, the grinding heads are now carborundum-coated, and foot power has been replaced by motor power (Deng, 2011; Xu, 2014). At present, there are two main types of equipment for manual carving: grinding machines and flexible-shaft machines. The grinding machine is a large apparatus, and the seated carver holds the jade while using tools of various shapes. The flexible-shaft engraving machine is small, portable, and has a handheld electric-powered rotary tool with a flexible drive (Michaelson et al., 2016), which makes it convenient to change different grinding heads (figure 3). The emergence of motor power and the improvement of tools have not only increased carving efficiency but also benefited jade carvers. The new tools are suitable for detailed ornaments and small jade wares as well as larger wares. Furthermore, motor-driven equipment has driven the introduction and refinement of tools for specific uses: for example, various types of cutters, ultrasonic drilling equipment, mechanized grinding beads, and vibratory polishers (Xu, 2014).
Figure 3. Top left: The driveshaft is fixed in a horizontal direction on the jade grinding machine; at the end of the shaft is the turnbuckle or bayonet where the grinding head or the long horizontal shaft can be fixed. Various grinding heads (top right) can be exchanged according to the carving needs. Photos courtesy of Yongtao Chen. Bottom left: The object is moved by hand to contact the stationary rotating tool. Photo by Mingying Wang. Bottom right: The carver works the jade piece using the hand-held burr of the flexibleshaft machine. Both the jade and the tool are movable. Photo by Eric Welch; courtesy of Mazu Jade Co.
Since the 1990s, automated computer numerical control (CNC) processors have gradually been applied to jade carving. Together with design software and three-dimensional data processing, CNC engraving and milling machines can be used not only to manufacture original jade carvings but also to make 1:1 replicas of existing wares or historical relics. Three types of automated CNC engraving and milling machines are mainly used for jade carving: three-shaft, four-shaft, and five-shaft. The number of shafts represents the degree of processing freedom and in turn the quality of the resulting curved surface details. The three-shaft CNC machine is suitable for plane-relief engraving, while the four- and five-shaft CNC machines can execute three-dimensional carvings. Given cost and efficiency concerns, three- and four-shaft CNC machines are more common in the Chinese market. CNC technology can be applied to a wide range of processing types and are mainly used for engraving medium- and low-end jade and stone materials of various sizes. Its emergence and popularity means that carvings can be produced in bulk, further improving efficiency while maintaining the high intricacy of jade craftsmanship (figure 4).
Figure 4. With a CNC engraving and milling machine, a jade carving that takes 20 days by manual carving can be made in three to four days. Photo by Mingying Wang.
In addition to rotary tools, abrasive sands and powders are an important element in jade carving. Abrasive sands used in the primitive carving period were ordinary sands that contained a large amount of quartz particles harder than jade. With the development of jade carving craftsmanship, abrasive sands have gradually been refined (Hansford, 1950; Sax et al., 2004; Xu, 2011). Today they include natural abrasives (such as corundum, quartz, and diamond) and synthetic abrasives (such as carborundum and synthetic diamond). In general, artificial abrasives are superior to natural ones (except for natural diamond) in quality, hardness, and performance. Therefore, modern jade carving mainly utilizes artificial abrasives, which are often used for coating the grinding heads (Zhao and Zhang, 2000).
Throughout the evolution of Chinese jade carving, every tool innovation has experienced a long development cycle. The transition from the prehistoric stone tool to the bronze tool to the iron tool to the modern machine was accomplished over thousands of years. However, due to regional variations and economic constraints, new jade carving tools were not suddenly applied in a given dynasty but were gradually adopted over a longer period (Xu, 2011). For example, during the Xia and Shang Dynasties, bronze tools did not completely replace the primitive stone tools, and the two were used together for a long time (Lu et al., 2014). Nephrite, the mainstream material of Chinese jade culture, has a high toughness, which makes jade carving more difficult but promotes the innovation of tools. In early jade carving, several weeks were needed just to saw through a boulder (Hansford, 1950), making the development of tools and technology more important.
EVOLUTION OF JADE CARVING CRAFTSMANSHIP
If the tool is the fundamental force driving the evolution of jade carving, then craft is also an important factor. The two forces are inseparable. Every innovation in tools allows the carving craft to take a leap forward (Xu, 2011). Therefore, we will now analyze and summarize representative crafts used in different tool development periods (table 2).
Table 2 shows that over 5,000 years of Chinese jade culture, the development of carving tools has featured two trends: tool speed becoming increasingly faster, and grinding powder becoming increasingly harder. The evolution of tools improved processing conditions for carvers. As a result, Chinese jade carving moved toward greater diversity, complexity, and delicacy. Consider the shapes, for example. During the Xia, Shang, and Xizhou Dynasties, jade wares were mainly two-dimensional tablet shapes. With advances in tools and craftsmanship, the forms gradually became three-dimensional. In the Ming and Qing Dynasties, most jade wares displayed rounded shapes.
Although each of the five stages in table 2 corresponds to a certain historical period, any craft or technology progresses gradually through exploration and creation. The accumulation of experience takes a long time. The refinement of a craft is first tested on a small scale and then gradually promoted and popularized. Therefore, a change in dynasty does not necessarily represent the immediate progress of a craft.
Primitive Jade Carving (circa 3500–circa 2070 BCE). In the Neolithic Age, stone tools were fashioned by cutting, sanding, and drilling. These three techniques were inherited by the primitive jade carvers and further developed (Yang, 2006). Based on evidence from unearthed relics, it can be speculated that jade carving procedures in the Neolithic period mainly comprised collecting, cutting, grinding, carving, drilling, and polishing either by hand or by rotary machine. These same basic procedures were inherited by later generations. Such representative techniques as piercing, inlay, and eggshell carving (to produce thin “skins”) also made their first appearance (You, 2001; Kong, 2007; Xu, 2011). However, the quality of jade carving craftsmanship varied from place to place due to different rates of cultural development (You, 2001).
Bronze Rotary Machines (circa 2070–circa sixth century BCE). Although they emerged in the Neolithic period, inlays in the Xia, Shang, and Xizhou Dynasties outnumber those before the Xia Dynasty and display outstanding intricacy. These inlays were mainly combinations of bronze and turquoise, jade and turquoise, or bronze and jade. Jade vessels emerged in this period, with a corresponding rise in skilled hollowing (Xu, 2011).
The jade carving craft in the Shang Dynasty, which included cutting, grinding, carving, drilling, polishing, design, and shape creation, reached a high level (Technical Research Group of Beijing Jade Factory, 1976). During this dynasty, the Qiaose technique to artistically take advantage of jade’s naturally uneven or different color first appeared. In the process of Qiaose craft, the shape and placement of the colors on the rough jade should be taken into account so as to utilize the colors skillfully. The jade turtle in figure 5, unearthed at Xiaotun in Henan Province, is a successful example of Qiaose (Yang et al., 2005). Chain carving, a very difficult craft carved from a single piece of stone, also emerged in the Shang Dynasty, laying the foundation for its development in later generations (Xu, 2011).
Figure 5. This meticulously designed jade turtle unearthed in 1975 in the Yin Ruins in Xiaotun is an example of Qiaose craft from the late Shang Dynasty (1600–1046 BCE). The grayish white part of the jade is carved into the head, neck, and abdomen, and the dark part forms a vivid turtle shell, displaying the artist’s skillful use of color. As a symbol of longevity in China, the turtle was often used during ancient burials. Photo from Yang et al. (2005, p. 158).
Iron Rotary Machines (circa sixth century BCE–circa 581 CE). Burial jade thrived in the Chunqiu Period and culminated in a set of special carving systems formed in the Han Dynasty. Burial jade shows no significant difference from daily jade in terms of the carving procedure but it is more concise and less exquisite (You, 2001). Take the Han Badao (concise carving) craft in the Han Dynasty as an example. Typical of burial jade, the lines from Han Badao are bold, vigorous, and concise, seemingly carved by swords (figure 6).
Figure 6. This jade cicada is a typical example of the Han Badao (concise carving) craft highlighted in the Han Dynasty (206 BCE–220 CE). This technique unfolds the full vitality of the jade cicada through just a few concise lines. As the cicada implied rebirth in ancient China, cicada carvings were often found as burial items in Han tombs, placed on the tongue of the body. Photo by Mingying Wang, from Tianjin Museum.
What epitomizes the craftsmanship of the Zhanguo Period is the wide application of the openwork technique (Lu and Ouyang, 2014). In this period, piercing was mainly applied to flat jade wares, but a small number of three-dimensional openwork also appeared. The craft even exerted influence during the Han and Wei Dynasties (circa 206 BCE–265 CE). Techniques integrating jade and metal, such as inlay and splicing, also surpassed those in the Shang and Xizhou Dynasties. These two techniques reached an advanced level during the Zhanguo Period, as evidenced by the number and quality of artworks applying these two crafts (Xu, 2011). Copper, silver, iron, and gold were perfectly inlaid in jade or used to stitch jade pieces together. For example, the jade clothes sewn with golden or silver thread often buried in the tombs of nobility in the Han Dynasty are elaborate and complex in craftsmanship. They are typical of splicing at this time and exemplify burial jade culture in the Han Dynasty (figure 7).
Figure 7. Sheng Liu’s jade burial suit (Xihan Dynasty, 206 BCE–8 CE) was unearthed in Mancheng, China, in 1968. Approximately 1.88 m long, the suit is composed of 2,498 jade tablets sewn together with approximately 1,100 grams of gold wire. It is the earliest and best-preserved jade burial suit in the history of Chinese archaeological excavation (Yang et al., 2005). Photos by Lin Xu (top) and Tian Wang (bottom), from Hebei Museum.
Flexible connecting, which has the same engraving principle as chain carving, was found in tombs of the Shang Dynasty but thrived and matured in the Zhanguo Period, when a great many quality artworks appeared (Xu, 2011). Among them, the sixteen-segmented jade ornament excavated from the tomb of Marquis Yi of State Zeng is the best-known application of the flexible connecting craft in this period (figure 8).
Figure 8. This dragon-phoenix pendant with 16 grayish white components (48 × 8.3 × 0.5 cm), which was carved from a single piece of jade, is from the early Zhanguo Period (475–221 BCE). The movable and foldable components are carved into dragon, phoenix, or Bi-type disc openwork designs. The ornament embodies not only the flexible connecting technique but also the mature piercing technique (Gu, 2005). Top photo from Gu (2005, p. 93). Bottom photos by Yuetong Li, from Hubei Provincial Museum.
Table-Type Iron Rotary Machines (circa 581–1960). Gold and jade were already being combined prior to the Qin Dynasty (221–206 BCE), and the inlay of jade with gems and gold gained popularity during the Sui and Tang Dynasties. In the late Ming Dynasty, this craft was widely applied and became a striking feature. In the Qing Dynasty, influenced by Islamic jades that originated in central, western, and southern Asia in the late fourteenth century (figure 9), inlay often depicts various plant patterns, which gave off a sense of exotic charm (Deng, 2007; Xu, 2011).
Figure 9. This white nephrite bowl with inlaid gems and gold tracery (Qing Dynasty, 1644–1911) is engraved with a lotus pattern on the outside and six sets of pomegranate patterns inside. It shows both the eggshell carving and inlay techniques and is a typical Islamic jade from China’s western regions (Gu, 2010b). Photos by Rui Zhang (left) and Maiying Dong (right), from Shanxi Museum.
During the Song, Liao, Jin, and Yuan Dynasties (circa 960–1368), influenced by the mature arts of painting and sculpture, jade carvings became three-dimensional. Themes of human figures, flowers, animals, and landscapes were often accompanied by the distinctive openwork carving of the time. The piercing technique surged, and flat carvings were gradually replaced by three-dimensional picturesque jade wares (figure 10). In the Ming Dynasty, the intellectual “literati paintings” of southern Chinese culture, which are distinct from folk and royal paintings, highlighted romantic charms and reflected the literati’s personal feelings. This led to the incorporation of landscapes and texts in the decorative patterns of jade wares (Xu, 2011). In the Qing Dynasty, the use of royal court painters in the design of jade carvings in combination with fine craftsmanship created a peak of artistic integration (Yang, 1982; Xu, 2011).
Figure 10. This gem-inlaid gold base in the shape of a lotus is topped with a carved jade dragon and cloud (Ming Dynasty, 1368–1644). The white nephrite adopts the multi-layered three-dimensional piercing technique with exquisite details. Photo by Yuetong Li, Hubei Provincial Museum.
During this period, the improvement and combination of tools and craft promoted the emergence of large jade carvings (Kong, 2007). For example, the massive bowl “Dragons Amid Waves” from the Yuan Dynasty was the first large jade carving that we know of. In the Qing Dynasty, jade carvers created several large works weighing thousands of kilograms, such as the complex three-dimensional landscape (called Shan Zi in Chinese) “Emperor Yu Leading People in Subduing Floods” (figure 11) and “Nine Elders Meeting During the Huichang Period” (Xu, 2013). These large carvings are mostly themed with landscapes, human figures, and animals, often accompanied by skilled calligraphy engraving on the back or sides. To create these pieces, several jade carvers had to work at the same time in an organized fashion. Under the processing conditions of the time, such a large work would take several years to complete. Thus, the production of large jade carvings marks the peak of the craft in ancient China (Xu, 2011).
Figure 11. The nephrite Shan Zi sculpture “Emperor Yu Leading People in Subduing Floods” (224 × 96 cm, weighing at least 5,000 kg) was carved in Yangzhou from 1781 to 1787 CE. In the 53rd year of the Qianlong reign (1788 CE), the court jade craftsmen engraved the imperial poem on its back (Zhu, 2007). Photo from Zhu (2007, p. 71).
Many other techniques also emerged during this period, such as the full development of Qiaose and eggshell carving, and the emergence of jadeite carving in the Qing Dynasty (You, 2001; Kong, 2007; Xu, 2011).
Modern Machines (1960–present). After the Qing Dynasty, the traditional foot treadle was used until the early days of the People’s Republic (Xu, 2014). In the late 1950s, with the policy reform of the national planned economy, government-owned jade carving factories sprang up, led by the manufacturing centers of Beijing, Shanghai, Yangzhou, and Suzhou (Ma, 2014). Jade carvings were produced under industrial management using assembly lines (Ji, 1984). It was at this time that motor-driven carving machinery began to be employed.
With the popularization of power-driven systems in the 1960s and the continuous refinement of the tools (Xu, 2014), the modern carving industry ushered in a new era following the reform and opening up of trade in 1978. Modern tools and methods have changed jade carving, and pieces that once took years can now be finished in months or even weeks (Tucker, 1982).
Modern jade carving inherits the characteristics of craftsmanship from past dynasties (Xu, 2014) and is further developed on the basis of various ancient techniques. With the emergence of power-driven tools, jade carving has become more elaborate, with smoother lines. The common techniques of the modern craft include Qiaose, eggshell carving, piercing, chain carving, calligraphy engraving, gem embedding, gold and silver inlay, miniature carving, and others. Artisans will often make a final decision on which techniques to use based on the color, shape, and toughness of the rough and the theme of their creation. Among these techniques, Qiaose (figure 12) and piercing (figure 13) are widely used in jade carving and showcase the carvers’ creative talents. Many of these techniques are highly specialized, and as a result jade carvers often devote their whole life to one technique. Jingui Ma, for example, devoted himself to the craft of inlay with gems and gold in the way of traditional vessels and thus formed his distinctive style (figure 14).
Figure 12. This modern work (9.3 × 4.2 × 2.8 cm), which retains the beautiful natural color of the jade crust, depicts ancient tree branches and a monk sitting in meditation underneath, showing a Zen sensibility. The ingenious application of traditional Chinese painting techniques to the grain carving of the branches demonstrates a natural artistic style (Ao et al., 2014). Photo courtesy of Gems and Jewelry Trade Association of China (GAC).
Figure 13. Because of its toughness and fine texture, nephrite is often subjected to piercing. The modern nephrite work “Holy Lingshan, Journey to the West” (38 × 26 × 8 cm) displays the scene of Xuanzang and his three disciples passing through the Lingshan holy land (Ao et al., 2009). Photo courtesy of the Gems and Jewelry Trade Association of China (GAC).
Figure 14. The gold inlay used on this dark gray nephrite vessel is elaborate and exquisite. Accompanied by traditional auspicious animal patterns, it makes the work vivid and graceful, paying homage to an antique style. Photo courtesy of Jingui Ma Jade Carving Studio.
To illustrate modern jade carving, the authors statistically analyzed the 2,464 finalist works from 2012 to 2017 for the Tiangong Awards (Wang and Shi, 2020), China’s most prestigious competition. As shown in figure 15, Qiaose and piercing are the two most common, particularly the former, followed by calligraphy and chain carving. Other crafts are more specialized and mastered by only a few. Chain carving (figure 16) and eggshell carving (figure 17) are still applied mainly to vessels; calligraphy engraving rarely appears alone and is used to provide inscriptions for the jade carvings (figure 18). By and large, two or three techniques are frequently used in combination. For instance, gem embedding is usually integrated with gold and silver inlay and eggshell carving to heighten the exotic appeal (figure 19). Techniques such as 3D and relief carving are fundamental thus used in almost all pieces, which is why they are not mentioned separately in this article (Ao et al., 2012–2017).
Figure 15. Among modern jade carving techniques in China, Qiaose is by far the most common. In this chart, “Others” refers to works that contain only basic techniques, such as three-dimensional engraving or relief carving. Yearly data from Ao et al. (2012–2017).
Figure 16. A modern jade bottle with chains (16 × 5 cm) showing the chain carving and piercing techniques. The shape of the work is neat, delicate, and elegant, manifesting the carver’s high level of craftsmanship and ingenuity. Photo courtesy of GAC.
Figure 17. This eggshell-thin nephrite vase with dark green color by Ting Yu, measuring approximately 34.6 × 11 cm, is uniform and exquisite. Its wall is even, thin (around 0.1 cm), and transparent, and its body is decorated with fine interlocking lotus branches that lend a dignified appearance (Ao et al., 2015). Photos courtesy of GAC.
Figure 18. Wei Hu’s modern nephrite work “Profiling the Red Cliff” (7.5 × 8 × 1 cm) adopts calligraphy and miniature carving to present Shi Su’s prose and resorts to line-drawing carving to display the landscape of the Red Cliff, clearly demonstrating the artist’s mastery (Ao et al., 2016). Photo courtesy of GAC.
Figure 19. This jade pot is light, thin, and embedded with gold wire, ruby, and sapphire in an exquisite Islamic style. It combines white nephrite with embedded gems, gold inlay, and eggshell carving techniques, fully reflecting the superb craftsmanship. Photo courtesy of Jingui Ma Jade Carving Studio.
Although inheriting the ancient craftsmanship, modern jade carving attaches more importance to personal style and has made breakthroughs in expressing it with modern features. For instance, the traditional eggshell carving craft is mostly used in vessels. But master carver Xi Jiang broke tradition and carved nephrite with dark green color into wrinkled paper (Wang and Shi, 2020), which vividly shows the thinness and transparency of the work and breaks new ground for the eggshell carving technique (figure 20). Master Desheng Wu, who excels at figure carving, incorporates the concept of Western sculpture. He pays great attention to the innovation and exploration of artistic style and boldly uses exaggerated ways to endow traditional jade carving craftsmanship with modern beauty (figure 21).
Figure 20. “To Mountain” (19.6 × 11 × 5.2 cm) takes full advantage of the high toughness of nephrite and uses eggshell carving to show the thin (0.85–2.53 cm) and transparent feel of creased paper. Its theme, utilizing modern art methods, is “diligence as the path to the mountain of knowledge” (Ao et al., 2013). Photo courtesy of Xi Jiang Jade Carving Studio.
Figure 21. “Snake Girl,” a representative work from Master Desheng Wu’s “Naked Woman” series, combines the smooth and warm luster of white nephrite jade with a modern stylized design applying openwork and Qiaose crafts. Photo courtesy of Desheng Wu Jade Carving Studio.
JADE CARVING PROCESS ILLUSTRATED BY MODERN WORKS
As mentioned above, ancient jade carving includes five steps: material selection, examination, design, carving with abrasives, and polishing (Xu, 2014). Depending on the tools and techniques, modern jade carving can be divided into three mainstream methods, each with a different procedure.
Power-Driven Manual Carving. This method inherited from ancient carving still enjoys a dominant role in modern China (figure 22). The procedure has remained essentially the same (Deng, 2011; Michaelson et al., 2016). Material selection and examination are targeted to maximize beauty. Design seeks to integrate the shape and patterns according to the features of the jade material (such as color and texture). Carving, usually the most time-consuming step in the process, is where design ideas turn into artwork through the use of tools. Polishing refers to the fine grinding of a jade’s surfaces to make them smooth and bright, with an aesthetic appeal. It is interesting to note that artists sometimes use different finishes (degrees of polish or lack of polish) to create stunning designs.
Figure 22. These four photos of a bodhisattva illustrate the modern manual carving process, which includes four steps (left to right): material selection and examination, design, carving, and polishing. Photos by Xiaodong Wang.
Computer Numerical Control (CNC) Engraving. This method is composed of two parts: model design and processing by machine. The model is designed using computer software. The designed model is first processed and programmed to determine the machining coordinate system and model size. The corresponding machining tools are then selected, and the program is written according to the machining requirements. In China, a CNC engraving and milling machine is frequently used in jade carving. Finally, the program is imported into the CNC machine to control its operation (figure 23).
Figure 23. A three-shaft CNC machine engraving tabular nephrite. The machining process is monitored by the computer program. Because the cutting speed is extremely high, the machine needs fluid to keep cool. Photo by Mingying Wang.
The CNC machine can achieve plane carving (figure 24) and 3D carving, but complex three-dimensional shapes and patterns can only be achieved through a combination of CNC machine and manual carving. Moreover, the CNC machine is rather limited with respect to the special techniques listed above: Only simple piercing can be achieved. The eggshell carving process has very specific requirements for jade materials, and it is difficult to use with materials with poor toughness that are prone to splitting. Qiaose, chain carving, and inlay with gold or gems rely on manual carving and cannot be achieved with the CNC machine.
Figure 24. Exquisite details of this dark nephrite ink slab (used to grind ink for Chinese calligraphy) were processed by a three-shaft CNC machine. Photos by Mingying Wang.
3D Scanning and Auto Carving. The first step of this method is to scan the object through the 3D scanning device, which results in a 3D model profile. The 3D model profile is then reconstructed using reverse design software to generate a new model. The coordinates of the 3D model are determined with the CNC design software, and the tool parameters are compiled into a final machining program. Under the guidance of the final program, the CNC machine tool conducts the 3D carving. This method is mostly used in the replication of ancient jade relics (figure 25).
Figure 25. This piece of Manas gray-green nephrite is a 1:1 replica of the imperial jade seal with calligraphy engraving in Qianlong’s reign (1736–1795). It was processed by 3D scanning and auto carving. Photo by Mingying Wang.
THE NATURE OF CHINESE JADE CRAFT’S EVOLUTION
You (2001) proposed that the fundamental method of studying ancient jade is to analyze it in relation to its historical and cultural background. This method applies to the study of not only ancient jade but also the modern carving craft and culture. After all, modern jade carving is integral to the history of jade. What modern power-driven implements and automated CNC engraving and milling machines are to jade carving today is no less than what iron tools are to jade carving history. Against the background of power and tool transformation, the reform and opening up of China, rapid economic development, and mass consumption, contemporary jade art demonstrates more diverse themes, more open art forms, more meticulous craftsmanship (figure 26), and a wider audience (Wang and Shi, 2020).
Figure 26. Left: A nephrite pendant (6 × 4.2 cm) with a poem and drawing from the Qing Dynasty. On the front is a senior, a child, and scenery. The back demonstrates calligraphy engraving, with a traditional form of expression. Photo from Gu (2010a, p. 1). Right: A modern nephrite pendant “Free Cloud and Crane” (10 × 5.2 cm) also features a carved landscape on the front and calligraphy on the back. Although similar to the traditional form of expression, it uses a more freehand style that retains the material’s natural color, shaping it into the half red sun with a touch-of-autumn feel reminiscent of Chinese ink painting (Ao et al., 2015). Photo courtesy of GAC. A comparison of the details reveals that the modern craft is more delicate, with smoother carving lines, thanks to motor-driven tools.
The progress of any craft or technology is a process of gradual exploration and long-term accumulation of experience (Xu, 2014). Analysis of Chinese jade carving proves a basic law—the craft learns from the past and sets a new course for the future with heritage and innovation. In general, innovation outweighs heritage. Innovation refers to multifaceted improvement and transformation based on heritage (You, 2001). Modern jade carving inherits and improves upon ancient techniques, but more importantly creates innovations in power-driven and machine engraving tools, contributing to an increase in efficiency and further development of the art. Thus, modern jade art is the best illustration of heritage and innovation working in harmony.
In Chinese jade carving, the tool plays a fundamental role and is the root of all craftsmanship transformation. Influenced by the evolution of carving tools, Chinese jade carving craftsmanship has undergone long-term transformation and still continues to develop. It has distinctive characteristics—the diversity of techniques, the gradual nature of innovation, and the adoption of foreign culture and craft (You, 2001; Kong, 2007). Thus the evolution of carving craftsmanship not only helps to clarify the development of China’s jade culture but also provides meaningful enlightenment for the growth of the modern jade carving industry.
A look at the evolution of Chinese jade carving tells us that every step forward in tools and production technology is immediately reflected in craftsmanship. In the contemporary era, the development of artificial intelligence and industrial automation will continue to boost mechanization and large-scale production in the Chinese jade carving industry. These trends will further contribute to the sustained improvement of the creative design and cultural value of jade carvings.
In this era of advanced science and technology, automated CNC engraving has become a trend, especially for middle- and low-end carvings. In the future, however, the dominant method will continue to be manual carving, especially of high-end jade wares, which represents the inheritance of 5,000-year-plus tradition. The advancement of modern jade carving can only be achieved through enhancing creativity, deeply understanding jade culture, and balancing manual and automated machine methods.
About the Authors
Ms. Mingying Wang is a doctoral candidate at the School of Gemmology, China University of Geosciences in Beijing. Prof. Guanghai Shi (firstname.lastname@example.org, corresponding author) is a professor at the School of Gemmology, and director of the Journal Center, China University of Geosciences in Beijing.
The authors thank Qing Zheng, Xing Tong, and GAC (Gems & Jewelry Trade Association of China) for images of the recently awarded carvings. They are also grateful for the assistance of Xi Jiang, Xi Yang, Hongwei Ma, Yiwei Zhai, Desheng Wu, Ting Yu, Guang Yang, Xiaodong Wang, Yongtao Chen, Shangfeng Xie, Wentao Du, Yuetong Li, Tian Wang, Sisi Zhang, Huan Wang, Maiying Dong, and Rui Zhang, who provided photos and valuable industry information. Special appreciations are given to Lin Xu, Tao Hsu, Xiuyan Xu, Xiaochong Zhang, Xuemei Zhang, and Ying Jiang for their constructive discussions. The authors would not have been able to finish this article without the help of these people. The review comments by anonymous referees are gratefully appreciated.
Ao Y., Sun F.M., Zhao Z.L., et al. (2010) Classic Collections of 2009 China Jade Carving & Stone Carving Works Awarded with Tian Gong Prize. Geological Publishing House, Beijing, 295 pp.
——— (2013) Classic Collections of 2012 China Jade Carving & Stone Carving Works Awarded with Tian Gong Prize. Geological Publishing House, Beijing, 378 pp.
——— (2014) Classic Collections of 2013 China Jade Carving & Stone Carving Works Awarded with Tian Gong Prize. Geological Publishing House, Beijing, 366 pp.
——— (2015) Classic Collections of 2014 China Jade Carving & Stone Carving Works Awarded with Tian Gong Prize. Geological Publishing House, Beijing, 402 pp.
——— (2016) Classic Collections of 2015 China Jade Carving & Stone Carving Works Awarded with Tian Gong Prize. Geological Publishing House, Beijing, 354 pp.
——— (2017) Classic Collections of 2016 China Jade Carving & Stone Carving Works Awarded with Tian Gong Prize. Geological Publishing House, Beijing, 340 pp.
——— (2018) Classic Collections of 2017 China Jade Carving & Stone Carving Works Awarded with Tian Gong Prize. Geological Publishing House, Beijing, 400 pp.
Bao Y.Z. (2008) Research on the Situation and Inheritance of the Chinese Miniature Sculpture Art. Master’s Thesis, The Central University of Nationalities, Beijing, 44 pp.
Barnes G.L. (2018) Understanding Chinese jade in a world context. Journal of the British Academy, Vol. 6, pp. 1–63, http://dx.doi.org/10.5871/jba/006.001
Deng S.P. (2007) Exquisite Beauty: Islamic Jades. National Palace Museum, Taipei, 287 pp.
——— (2011) Art in Quest of Heaven and Truth: Chinese Jades through the Ages. National Palace Museum, Taipei, 172 pp.
Desautels P.E. (1986) The Jade Kingdom. Van Nostrand Reinhold Co., New York, 118 pp.
Gu F. (2005) The Complete Collection of Jades Unearthed in China (10—Hubei and Hunan Volume). Science Press, Beijing, 240 pp.
——— (2010a) Chinese Jades in Traditional Collections (6—Qing Dynasty). Science Press, Beijing, 256 pp.
——— (2010b) Chinese Jades in Traditional Collections (7—Qing Dynasty). Science Press, Beijing, 256 pp.
Hansford S.H. (1950) Chinese Jade Carving. Lund Humphries Co., London, 145 pp.
Ji L. (1984) Crafts and Arts in Contemporary China. China Social Sciences Press, Beijing, 650 pp.
Kong F.A. (2007) The Study of Technology of Chinese Ancient Jade Producing. PhD Thesis, Shanxi University, Taiyuan, 332 pp.
Lu J.F., Fang X.M., Zhou X.J. (2014) General History of Chinese Jade (the Northern Volume of the Neolithic Age). Haitian Press, Shenzhen, 303 pp.
Lu J.F., Yu Y.J., Fang G. (2014) General History of Chinese Jade (the Xia & Shang Dynasties). Haitian Press, Shenzhen, 336 pp.
Lu J.F., Ou-yang M.Y. (2014) General History of Chinese Jade (the Zhanguo Period). Haitian Press, Shenzhen, 358 pp.
Lu J.F., Li Y.D. (2014) General History of Chinese Jade (the Qin & Han Dynasties). Haitian Press, Shenzhen, 392 pp.
Ma G.Q. (2014) Xinjiang Hetian Placer Nephrite (White Jade) Grading Standards and Illustrations. Xinjiang People’s Press, Urumqi, 299 pp.
Markbreiter S. (1985) Jade carving in two cities. Arts of Asia, Vol. 15, No. 1, pp. 63–73.
Michaelson C., Sax M., Wu H. (2016) The renaissance of jade carving in China today. Arts of Asia, Vol. 46, No. 3, pp. 61–71.
Niu Q.B. (2015) Jade carving craftsmanship during the Neolithic Age and the Shang Dynasty. Journal of Nanyang Normal University (Social Sciences), Vol. 14, No. 11, pp. 46–51.
Read P. (1981) Travels in China. Canadian Jeweller, June, pp. 134–135, 137.
Sax M., Meeks N.D., Michaelson C., Middleton A.P. (2004) The identification of carving techniques on Chinese jade. Journal of Archaeological Science, Vol. 31, No. 10, pp. 1413–1428, http://dx.doi.org/10.1016/j.jas.2004.03.007
Technical Research Group of Beijing Jade Factory (1976) Some ideas on jade carving craftsmanship in Shang Dynasty. Archaeology, No. 4, pp. 229–233, 286–287, 290.
Thomas S.A., Lee H.W. (1986) Gemstone carving in China: Winds of change. G&G, Vol. 22, No. 1, pp. 24–34, http://dx.doi.org/10.5741/GEMS.22.1.24
Tucker E. (1982) Jade forms from ancient China. G&G, Vol. 18, No. 1, pp. 20–31, http://dx.doi.org/10.5741/GEMS.18.1.20
Wang M.Y., Shi G.H. (2020) Characteristics of modern Chinese jade carvings: The nephrite jade works that won the Tiangong Awards from 2003 to 2014. Arts of Asia, Vol. 50, No. 3, pp. 88–102.
Wen G., Jing Z.C. (1992) Chinese Neolithic jade: A preliminary geoarchaeological study. Geoarchaeology, Vol. 7, No. 3, pp. 251–275, http://dx.doi.org/10.1002/gea.3340070304
Xu L. (2011) Chinese Ancient Jade-Making Process. The Forbidden City Publishing House, Beijing, 269 pp.
——— (2012) An overview of jade carving technology in ancient China—A preliminary comparison with the jade culture and jade carving technology in ancient Central America. Essence of Nature – Civilization of Ancient Jade in China and Mexico. The Forbidden City Publishing House, Beijing, pp. 324–338.
——— (2014) Technology of jade-making is helpful to appraisal of ancient jade. Collectors, No. 8, pp. 28–34.
Xu X.D. (2013) Classics of the Forbidden City (Jade in the Collection of the Palace Museum). The Forbidden City Publishing House, Beijing, 300 pp.
Yang B.D. (1982) Court jades of Qing Dynasty. Palace Museum Journal, No. 1, pp. 49–61, 101–104.
——— (1989a) Aspects of Chinese ancient jadeware. Palace Museum Journal, No. 1, pp. 32–48, 99–100.
——— (1989b) Aspects of Chinese ancient jadeware. Palace Museum Journal, No. 2, pp. 31–40, 97–98.
——— (2004) Discussion on characteristics of the prehistoric jade carving and their differences. Archaeology, No. 10, pp. 62–68.
——— (2006) A review of jade carving tools. Yang Boda’s Views on Jade—Ba Zhi Selected Works. The Forbidden City Publishing House, Beijing, 575 pp.
Yang B.D., Qi J., Zhao G.D., et al. (2005) Chinese Jade Complete Works. Hebei Fine Arts Publishing House, Shijiazhuang, Vol. 1, 316 pp.
Yi F. (2001) A Brief Chinese Chronology. The Heritage Press, Beijing, 267 pp.
You R.D. (2001) An Introduction to Chinese Ancient Jade. The Forbidden City Publishing House, Beijing, 367 pp.
Zhao Y.K., Zhang J.M. (2000) Chinese Jade Carving Technology. Beijing Industrial Art Publishing House, Beijing, 481 pp.
Zhu J.J. (2007) Classics of the Forbidden City (The Forbidden City Treasure). The Forbidden City Publishing House, Beijing, 247 pp.
In Chinese art, "jade" (known by the Chinese character "yu") is an ornamental stone used in a wide variety of jewellery art, figure carving and other types of sculpture - in statue-form and relief sculpture.
Based on evidence from unearthed relics, it can be speculated that jade carv- ing procedures in the Neolithic period mainly com- prised collecting, cutting, grinding, carving, drilling, and polishing either by hand or by rotary machine.
Jade can be cut to shape, manually, using diamond wire handsaw blades. Jade can be cut, mechanically, by using diamond cutting wheels or slitting discs attached to a rotary tool. Specialised Multi-functional Mini Table Saws are available for cutting jade.
Jade stones are carved so that their best features, including the color, clarity, and pattern, are showcased. The jade carving process can take anywhere from twelve to twenty-four hours to finish, depending on the design, while more complex designs may take two to four days.
Jade is difficult to understand, and values fluctuate wildly – from $3 to thousands per carat. For years, we were not able to master this multilayered gem with so many uses, definitions and colors. We were determined to understand it better, and 10 years ago, we began learning about it the only way we know how.